The 48/5000/70 MultiPlus-II GX from Victron Energy is a multifunctional inverter/charger with all the features of the Multiplus-II, including an external current sensor option which extends the PowerControl & PowerAssist functions and optimises self-consumption, but this version also includes an integrated GX device with 2x16 character display. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact unit. This design not only saves space, but simplifies your installation.
The clear, LCD display shows battery, inverter and (if connected) solar charge controller parameters which can also be accessed with a smartphone or other Wi-Fi enabled device.
The Multiplus-II GX is is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid Energy Storage Systems (ESS) and certain mobile applications. It has a built-in anti-islanding function and a long list of country approvals for use in ESS applications.
The built-in AC transfer switch performs the function of an Uninterruptable Power Supply (UPS) on the main AC output. In the event of a grid failure, or shore or generator power being disconnected, the inverter is automatically activated and takes over AC supply to the connected loads. This happens in less then 20 milliseconds and ensures that sensitive connected equipment continues to run without disruption. This feature can be deactivated if not required. The second/auxiliary output is live only when AC is available on the input of the Multiplus-II GX and is intended for connection to heavy consumption loads (e.g. water heater) that would quickly discharge the battery if run from the inverter.
You can achieve virtually unlimited power thanks to the Multiplus-II GX's ability to be parallel connected and setup for 3-phase operation.
Please note: Cables are not supplied. For the DC (battery) connection, Victron recommend 70mm² cable protected with a 200A mega fuse for run lengths of up to 5m. The 230V output is designed to be hard-wired to sockets or other parts of an AC system. If in doubt with regard to specifying AC cable size and circuit protection, please consult a qualified electrician.
- Built-in GX device with 2x16 character LCD display
- ESS application approval
- For use with off-grid and grid-connected alternative energy systems
- Pure sine wave output (inverter)
- Two AC outputs
- Transfer Switch UPS function (inverter) on mains AC output
- Adaptive 4-stage charging (charger)
- Storage mode to prolong battery life (charger)
- Battery temperature sensor (charger)
- Voltage sensing to compensate for voltage drop (charger)
- Remote On/Off switching
- Programmable alarm/signalling relay
- Parallel and 3-phase configurations possible
- Protected against output short circuit
- Protected against battery voltage low/high
- Protected against power overload
- Protected against over-temperature
- Protected against 230V AC detected on inverter output (e.g. from another AC source)
- Protected against input voltage ripple too high
- 5-year manufacturer's warranty
Victron Energy MultiPlus-II GX Inverter/Charger - 48V 5000VA/70A (50)
Inverter
- Input voltage range: 38 - 66 VDC
- Output voltage: 230VAC +/- 2%
- Output frequency: 50Hz +/- 0.1% (can be adjusted to 60Hz)
- Continuous output power at 25ºC: 5000VA
- Continuous output power at 25ºC/40ºC/65ºC: 4000/3700/3000W
- Maximum apparent feed-in power: 5000VA
- Peak power: 9000W
- Max. efficiency: 96%
- Zero load power consumption: 18W
- Zero load power consumption (AES mode): 12W
- Zero load power consumption in search mode: 2W
Charger
- Input voltage range: 187 - 265 VAC
- Input frequency: 45-65Hz
- Charge voltage (absorption): 57.6 VDC
- Charge voltage (float): 55.2 VDC
- Charge voltage (storage mode): 52.8 VDC
- Max. battery charge current: 70A
- Battery temperature sensor: Yes
General
- Transfer switch current rating: 50A (@ 230 VAC)
- Auxiliary output: Yes 32A
- External AC current sensor: Yes (optional extra)
- Programmable relay: Yes
- Interfaces: BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
- Output short circuit protection: Yes
- Overload protection: Yes
- Battery over-voltage protection: Yes
- Battery under-voltage protection: Yes
- Over-temperature protection: Yes
- 230 VAC on inverter output protection: Yes
- Input voltage ripple too high protection: Yes
- Operating temperature: -40ºC to +65ºC (fan assisted cooling)
- Battery connection: M8 bolts
- 230V AC cable connection: Screw terminals - 13mm² max.
- Ingress Protection rating: IP22
- Weight: 30kg
- Overall dimensions: 565 (H) x 323 (W) x 148 (D) mm
- Part Number: PMP482506000
- Bar Code: 8719076048824