The BMV-700 is Victron's new high precision multi-function battery monitor with a host of useful features. It essentially acts as a battery 'fuel gauge' for anyone needing to keep a check on the performance of their battery or battery bank. The information displayed by the BMV-700 includes voltage, current draw, Ah consumed, % charge level, 'time-to-go' and it features a programmable alarm and in-built relay to trigger external equipment under an alarm condition.
The shunt is fitted in-line with the battery's negative cable and the on-board PCB is powered by a fused positive supply. Once the battery monitor is panel-mounted in a suitable location (with or without the supplied square bezel) it is connected to the shunt's PCB using a single RJ12 data/power cable and programmed using the on-board menu.
Can be used with the Victron VE.Direct to Bluetooth Smart Dongle
Box contents
- BMV-700
- 500A/50mV shunt with on-board PCB
- RJ12 cable - 10m long
- Fused power cable - 2m long
- Optional square bezel
- Fixings
- Instruction manual
Features
- Displays: Voltage / Current / Power / Ah Consumed / State of Charge (%) / Time-to-go / Total kWh charged/discharged
- Auto re-calibration each time the battery is fully charged (to ensure accuracy is maintained)
- Auto-detection of nominal system voltage
- Programmable visual and audible alarm
- Programmable relay that can be energised/de-energised in an alarm condition
- Can be configured for use with other shunts
- Suitable for a single battery or a bank of batteries.
- Low current consumption
- Backlight for display
- Quick-install menu and detailed setup menu
- V.E Direct communication port for integration with other Victron equipment
- Suitable for use with 12V or 24V systems
- 5-year manufacturer's warranty
Victron Energy BMV-700 Battery Monitor (1 Battery/Bank)
- Input voltage:9.5 - 95 V DC
- Power consumption: 4mA @ 12V (2.9Ah / month) - without relay or backlight
- Operating temperature: -20ºC to +50ºC
- Battery capacity: 20-9999 Ah
- Relay: 60V, 1A NO (can be inverted to NC)
- Shunt terminal size: M10
- Shunt mounting holes: 5.8mm dia. (101.5mm between centres)
- Shunt overall dims: 120 (L) x 40 (W) x 50 (H) mm
- Monitor front dia: 63mm
- Panel hole cut-out dia: 52-53mm
- Body depth: 31mm
- Square bezel dims: 29 x 29 mm
- Part Number: BAM010700000R
- Bar Code: 8719076020073